This guide explains the information needed to select an active air-cooled CPU heatsink for an LGA4189 server platform. Socket compatibility alone does not establish cooling capacity: the processor, mounting arrangement, chassis airflow and inlet-air temperature must be reviewed together.

Reference product image. Confirm the exact model, mounting dimensions and configuration against the approved drawing before ordering.
Confirm compatibility before selecting a cooler
- Processor and socket: provide the CPU part number, socket and motherboard model.
- Mechanical envelope: provide mounting-hole locations, keep-out zones, maximum cooler height and chassis drawings. A nominal 2U chassis designation does not define the available heatsink clearance.
- Airflow: specify chassis airflow direction, inlet-air temperature, fan arrangement and any restrictions.
- Thermal target: provide sustained and peak heat loads, the operating profile and the required temperature limit, identifying whether it is a case or junction temperature.
- Electrical and acoustic requirements: confirm the fan supply, connector, PWM control, tachometer requirements and applicable acoustic test conditions.
Cooling performance requires defined test conditions
A CPU power rating is not a verified heatsink performance result. Compare candidate coolers using the same heat source, inlet-air temperature, airflow, mounting load and thermal-interface material. Request the applicable drawing and thermal test report before committing to a design.
Request model-specific dimensions, fan performance and thermal test data for the selected configuration before procurement.
Air-cooling specifications and engineering documents
For this air-cooled product, review the heatsink assembly drawing, fan specification, thermal-interface requirements and thermal test conditions. Liquid-coolant concentration, liquid flow rate and cold-plate pressure ratings are not specifications for this air cooler.
Request an engineering review
Send the CPU and motherboard model, available envelope, mounting drawing, thermal load, inlet-air conditions, fan requirements, prototype quantity and production forecast. ToneCooling can review the proposed configuration and identify the information required for a quotation.
Custom prototype lead time is normally 4–6 weeks, subject to the agreed design, drawing approval and order confirmation. Confirm the schedule for the selected configuration in the quotation.
Submit your project requirements for review or email sales@tonecooling.com.









