A data center GPU cold plate RFQ should start with engineering inputs, not a generic product description. The drawing, heat source map, coolant condition and hydraulic target determine whether a cold plate can be reviewed for manufacturability and quotation.
For the main RFQ path, review data center liquid cold plate RFQ review and prepare the engineering inputs before requesting quotation.
Related product path
Open this product path when the project platform or cold plate family matches your RFQ.
Engineering review input
Use this path for drawing, port layout, pressure-drop or validation review.
Main data center RFQ page
Return to the main data center liquid cold plate page for the complete RFQ checklist.
Start with the mechanical package
- 2D drawing, STEP file or module envelope
- GPU, accelerator or CPU footprint
- Stack height, mounting space and port direction
- Connector or hose clearance limits
Define the thermal and hydraulic targets
- Heat load by source area
- Coolant type and inlet temperature
- Target flow rate in LPM
- Pressure-drop target or maximum limit
State validation requirements
- Leak test requirement
- Pressure test requirement
- Flatness or contact surface requirement
- Cleanliness and documentation requirement
RFQ checklist
- Drawing, CAD file or thermal specification
- Heat load and heat source map
- Coolant type and inlet temperature
- Flow rate and pressure-drop target
- Envelope, port orientation and mounting limits
- Leak, pressure, cleanliness and documentation requirements
Official Platform References
Use these OEM platform pages as reference context only. ToneCooling RFQ review still requires the customer-approved drawing, module envelope, heat load, coolant, flow rate and pressure-drop target.
FAQ
Can ToneCooling quote without a final drawing?
A final quotation needs enough engineering data for review. If the drawing is not ready, send the closest available footprint, heat load, coolant, flow rate, pressure-drop target and envelope information.
Should platform names such as GB200 or GB300 be used in the RFQ?
Yes, when they identify the project platform. The official platform drawing and customer-approved requirements are still needed before quotation.
Where are ToneCooling data center cold plates manufactured?
Manufacturing is based in Huizhou, Guangdong, China. Regional websites should describe local communication or project coordination only when applicable.
Request data center liquid cold plate RFQ review
