Direct-to-chip cold plates often fail early RFQ review because the thermal target is shared but the port layout, hose path and service envelope are incomplete. The port direction should be checked with the server assembly, not only the cold plate drawing.
For the main RFQ path, review data center liquid cold plate RFQ review and prepare the engineering inputs before requesting quotation.
Related product path
Open this product path when the project platform or cold plate family matches your RFQ.
Engineering review input
Use this path for drawing, port layout, pressure-drop or validation review.
Main data center RFQ page
Return to the main data center liquid cold plate page for the complete RFQ checklist.
Port layout questions
- Where can inlet and outlet ports exit?
- Is there enough hose bend radius?
- Can quick-disconnect fittings be installed and serviced?
- Does the port direction conflict with the rack or chassis?
Drawing data needed
- Cold plate envelope
- Mounting hole pattern
- Nearby component keep-out zones
- Connector or hose specification if selected
Validation points
- Leak path risk
- Pressure test condition
- Assembly repeatability
- Service and replacement constraints
RFQ checklist
- Drawing, CAD file or thermal specification
- Heat load and heat source map
- Coolant type and inlet temperature
- Flow rate and pressure-drop target
- Envelope, port orientation and mounting limits
- Leak, pressure, cleanliness and documentation requirements
Official Platform References
Use these OEM platform pages as reference context only. ToneCooling RFQ review still requires the customer-approved drawing, module envelope, heat load, coolant, flow rate and pressure-drop target.
FAQ
Can ToneCooling quote without a final drawing?
A final quotation needs enough engineering data for review. If the drawing is not ready, send the closest available footprint, heat load, coolant, flow rate, pressure-drop target and envelope information.
Should platform names such as GB200 or GB300 be used in the RFQ?
Yes, when they identify the project platform. The official platform drawing and customer-approved requirements are still needed before quotation.
Where are ToneCooling data center cold plates manufactured?
Manufacturing is based in Huizhou, Guangdong, China. Regional websites should describe local communication or project coordination only when applicable.
Request data center liquid cold plate RFQ review
