Last updated: October 2, 2026 · ToneCooling Engineering Team
A ToneCooling Intel Birch Stream liquid cold plate is a custom T2 copper cold plate for Xeon servers on the Birch Stream platform; our reference design is rated for 500 W at 40 °C inlet and 1 L/min of 25% ethylene glycol-water, with 5 kPa flow resistance, cold-plate surface temperature of 60 °C and a 1 MPa pressure rating. Each project is built to your board, envelope and coolant; samples are typically available in 4–6 weeks.
What Is a Birch Stream Liquid Cold Plate?
A Birch Stream liquid cold plate is a copper plate with internal coolant channels that mounts on an Intel Xeon processor on the Birch Stream server platform and carries its heat into the server’s liquid loop. It replaces the air-cooled heat sink so high-TDP processors can run at full load in dense racks.
Birch Stream Cold Plate Reference Specifications
Reference design values from ToneCooling product data; final values for your project are confirmed at quotation (DFM review).
| Parameter | Reference value |
|---|---|
| Platform | Intel Birch Stream (Xeon) |
| Heat dissipation | 500 W |
| Test conditions | 40 °C inlet, 1 L/min, 25% EGW |
| Flow resistance | 5 kPa at 1 L/min |
| Cold-plate surface temperature | 60 °C |
| Pressure rating | 1 MPa |
| Material | T2 copper |
| Dimensions | 130 × 90 × 25 mm |
| Joining process | Confirmed at quotation (DFM review) |
Why Does the Pressure Rating Matter?
The pressure rating sets how much static and pump pressure the cold plate can see in your loop. A higher rating gives more margin in systems with long piping runs, tall risers or high-head pumps; confirm the maximum operating pressure of your CDU and facility loop and choose a cold plate rated above it.
Which Coolant Should You Use?
The reference design is tested with 25% ethylene glycol-water at 40 °C inlet. Pure water or propylene glycol mixtures are also possible; the coolant changes thermal and hydraulic performance and is confirmed for your loop during design review, together with corrosion inhibitors and the other wetted materials.
What Should You Send for a Birch Stream Cold Plate Quote?
- Board layout and socket positions, processor SKU and TDP
- Coolant type, inlet temperature, flow and pressure-drop budget
- Envelope height, mounting and retention requirements
- Connector or manifold interface and system pressure
- Quantity and target sample date
See also Intel LGA7529 liquid cold plates, AMD SP5 cold plates and the AI server liquid cooling kits.
Need a Birch Stream Cold Plate Quote?
Send your board layout, coolant and flow budget. An engineer reviews every RFQ and replies by email with next steps.
Birch Stream Liquid Cold Plate FAQ
What heat load is the Birch Stream cold plate reference design rated for?
500 W at 40 °C inlet and 1 L/min of 25% ethylene glycol-water, with 5 kPa flow resistance and a cold-plate surface temperature of 60 °C.
Is the Birch Stream cold plate a standard product?
No. It is a custom design built to your board, envelope and coolant; the values above are a reference design. ToneCooling’s standard kits are for GB300 4G+2C, GB200, H200 and H100.
What pressure rating does it have?
The reference design is rated to 1 MPa; the rating for your project is confirmed at quotation.
How long do samples take?
Samples are typically available in 4–6 weeks; confirm the schedule for your quantity in the quotation.
Reference values from ToneCooling product data; final thermal and hydraulic performance depends on the processor, TIM, mounting pressure, coolant and system integration. Intel and Xeon are trademarks of Intel Corporation; no affiliation or endorsement is implied.









