ToneCooling T-HS202311 NVIDIA rtx 3090 gpu liquid cold plate, product view

NVIDIA RTX 3090 GPU Liquid Cold Plate | T-HS202311

Dual-slot copper cold plate for the GeForce RTX 3090, 25 mm total height. 350 W below 61 °C at 50 °C inlet (11 K rise, ≈ 0.031 °C/W) with 30% EGW at 1 LPM / 5 kPa. High inlet-temperature rating makes it suitable for warm-water loops and for retrofitting existing 3090 render farms without a chiller.

350 W at < 61 °C surface with 50 °C inlet — 11 K case-to-inlet rise on 30% EG / water (EGW)
5 kPa at 1 LPM — low pressure drop for series and manifold loops
245.2 × 96.5 × 25 mm — 25 mm profile; port position to your chassis layout
TLP-bonded copper, 1 MPa rated — every unit leak-tested before shipment

Get A Free Quote

Download Datasheet (PDF)T-HS202311 · Rev. A · Sept 2026

Products Categories

Special-shaped Temperature Balancing Plates

Solar Type 3D Vapor Chamber

TC-LGA 2066/2011 Square

Tungsten Copper Alloy

Friction Stir Welded (FSW) liquid cold plate

Vacuum Brazed Liquid Cold Plate

Engineering overview

Thermal: 11 K case-to-inlet rise at rated load, measured at the contact area with 30% EG / water (EGW). Thermal interface material and mounting pressure set the final junction temperature — we supply the recommended TIM and torque spec with each order.
Hydraulic: 5 kPa at 1 LPM — low pressure drop for series and manifold loops; validated on our flow bench at the rated inlet temperature of 50 °C.
Mechanical: 245.2 × 96.5 × 25 mm copper plate, 25 mm overall height. Mounting pattern matches the target device; custom port orientation and fittings on request.
Construction: TLP – Transient Liquid-Phase Diffusion Bonding — a homogeneous metallurgical joint with no braze filler or flux residue in the coolant path; 1 MPa working pressure, 100% pressure-tested.
Fittings: G1/4 quick-disconnect, barb or custom per drawing; inlet/outlet position to your chassis layout.

T-HS202311 Specifications (as tested)

Parameter	Value
Model	T-HS202311
Target device	NVIDIA RTX 3090 GPU
Rated heat load	350 W
Coolant (as tested)	30% EG / water (EGW)
Inlet coolant temperature	50 °C
Max. plate surface temperature	< 61 °C
Case-to-inlet thermal resistance	≈ 0.031 °C/W (calculated from rated point)
Flow rate / pressure drop	1 LPM / 5 kPa
Working pressure rating	1 MPa
Dimensions (L × W × H)	245.2 × 96.5 × 25 mm
Base material	Copper
Bonding process	TLP – Transient Liquid-Phase Diffusion Bonding
Leak test	100% pressure-tested before shipment

Typical applications

Retrofit of existing RTX 3090 render farms
AI training and inference nodes
Liquid-cooled workstations

NVIDIA GPU 3090 double-wide liquid cooling plate Detail Display

ToneCooling CPU cold plate liquid cooling thermal management

Ordering & RFQ

How to order: quote model T-HS202311 with quantity and required fitting type. Samples 1–5 pcs with leak-test report; production quantities after drawing approval.

RFQ checklist: target device and heat load, quantity, coolant type, inlet temperature, target flow rate and available envelope. Send a STEP/PDF of your tray or assembly if port position matters.

FAQ

Can it run on warm water? The rated point is 50 °C inlet with 30% EG / water (EGW). Other inlet temperatures and coolants (pure water, EGW, PGW) are supported — performance is validated per coolant on request.

Can the ports or fittings be customised? Yes — fitting type, thread and inlet/outlet position are set per drawing without changing the qualified core.

What is included? Cold plate, mounting hardware, recommended TIM and torque spec, leak-test report. Datasheet PDF available above; STEP file on request.

NVIDIA and the GPU model names are trademarks of NVIDIA Corporation. Referenced for compatibility only; ToneCooling is an independent manufacturer.

Related products

ASIC / Switch Chip Liquid Cold Plate 1000–1500 W | T-HS202304/15/16

MOSFET Liquid Cold Plate for Vehicle Traction Converter | T-HS202314

NVIDIA H100 8-GPU + NVSwitch Liquid Cooling Assembly | T-HS202323

NVIDIA H800 GPU Liquid Cold Plate | T-HS202308

Get A Free Quote Now

How Additive Manufacturing Achieves Lightweight Cold Plates

Additive manufacturing builds cold plates layer by layer, allowing lightweight, complex internal channels that machining cannot make, at higher cost […]

Learn More >>

Things to Know Before Bulk Buying Liquid Cold Plates

Before buying liquid cold plates in bulk, confirm the specification, approve samples, agree on test methods and records, and check […]

Learn More >>

Vapor Chamber vs. Liquid Cooling Plate: A Comparison Guide

Choose a vapor chamber when you need to spread concentrated heat across a heat sink in thin, sealed or fanless […]

Learn More >>

Straight vs Inclined Channel Cold Plates for EV Thermal Management

Straight-channel cold plates have low pressure drop but can leave a temperature gradient along the flow, while inclined channels mix […]

Learn More >>

How Multi-Layer Cold Plates Achieve Efficient Cooling in Minimal Space

Multi-layer cold plates stack two or more channel layers to remove high heat in a small footprint or to cool […]